OMNICheck

Search

OMNICheck®

OMNICheck® is a mobile validation software application that verifies PIV, TWIC, FRAC, CAC, and DESFire credentials over the reader's contact or contactless interface. When configured in one of the four TWIC authentication modes, it functions as a TSA ICE-listed mobile TWIC reader. When operating in "Non-TWIC" mode, OMNICheck determines the card type and applies appropriate validation rules for that card type's data model and the interface mode (contact or contactless). This provides security managers with a flexible reader to control access to Controlled, Limited, and Exclusion areas as defined by SP 800-116.

OMNICheck is designed to be hands-free and works with all types of FIPS 201 cards. The card's authenticity is verified by issuing a cryptographic challenge to the card. The CHUID signature and biometric signatures are verified, and the revocation status of the X.509 Certificate for PIV (or Card) Authentication and the CHUID signing certificates are checked using a flexible combination of Microsoft's Cryptographic API, OCSP, or SCVP. For TWICs, OMNICheck can be configured to verify that the cardholder's FASC-N is not on the current TWIC Canceled Card List (CCL). The CCL can be imported, or can be accessed directly if the mobile reader has Internet connectivity.

To ensure that the credential is issued to the person presenting it, a fingerprint image is acquired and the resulting template is matched with the template encoded on the credential. This is configurable and is based on a combination of TWIC/Non-TWIC authentication modes, whether or not a PIN is required, and whether the credential was presented to the reader's contact or contactless interface.

For auditing, each credential validation session is logged to an encrypted, serialized data file. The contents of the file can be exported to a removable file system, such as a flash drive.

OMNICheck® includes a FIPS 140-2 Level 1-certified cryptographic module which supports RSA, AES, and ECC encryption algorithms, as well as SHA-1, SHA-256, and ECDSA signature algorithms. It is a FIPS 201-approved CAK authentication system when running on ARM-based mobile terminals such as:

OMNICheck meets all requirements and satisfactorily completed ICE as set forth in Broad Agency Announcement #BAA_TWIC_Reader_0602008 on the following portable readers:

OMNICheck can be upgraded to OMNICheck Plus Edition which adds network-based functionality and PACS integration, including:

Database synchronization (photos, names, PACS card numbers, access rights enforcement, TWIC privacy keys)
Downloading server-based configuration policies

OMNICheck Plus Edition is designed to operate offline after downloading cached cardholder data from the PACS.

OMNICheck's Registration option seamlessly folds PIVCheck Plus Mobile Edition into OMNICheck Plus.

Configurations

OMNICheck (software only)

Order OMNICheck, software only, if you are purchasing the mobile reader separately.

OMNICheck with Mobile Reader

OMNICheck with Mobile Reader includes a mobile reader selected from the list below, pre-loaded with OMNICheck software.

OMNICheck Plus (software only)

Order OMNICheck Plus, software only, if you are purchasing the mobile reader separately.

OMNICheck Plus with Mobile Reader

OMNICheck Plus with Mobile Reader includes a mobile reader selected from the list below, pre-loaded with OMNICheck Plus software.

Mobile Readers

Datastrip DSV2+TURBO

Description
Datastrip’s DSV2^TURBO is a handheld, biometrically enabled device that provides on-the-spot ID verification. The unit supports facial, fingerprint and iris biometrics to help agencies overcome the limitations of using only one biometric as their ID verification tool. By integrating two or more types of biometric security, the DSVII-SC allows facilities to comply with stringent programs such as HSPD-12 and FIPS 201.

Technical Specifications

Size:

■ Approx. 7" x 7" x 2" (185 mm x 185 mm x 50 mm)

Weight:

■ Approx. 2 lbs (950 g)

Operating System:

■ Microsoft® Windows® CE.NET Version 5.0

Processor:

■ Renesas SH4 7760 True Floating Point Processor enabling fast biometric matching

Display:

■ 3.5" color digital transflective touchscreen with stylus 240 (w) x 320 (h) QVGA

MEMORY:

■ 64 MB RAM, 128+ MB CF storage

Fingerprint Sensor:

■ 500-dpi capacitive solid-state sensor, 12.5 mm x 15.0 mm sensor area

Keypad:

■ 5-button backlit rubber keypad (power button + 4 programmable function keys)

Smartcard Interface:

■ Supports ISO-7816 contact and ISO-14443 A/B contactless smartcards

Interface:

■ Serial, USB host (2), CF slots (1 external, 1 internal), LAN

Other options:

■ Memory expansion, barcode scanning, 1.3 megapixel iris camera, 3.2 megapixel digital camera, docking cradle, third-party applications and more. Data and communications encryption options available to protect sensitive files including hardware encryption capabilities utilizing Security Access Modules for digital signatures.

Optional Wireless Features:

■ Wi-Fi (802.11g), Bluetooth®, Cellular (GSM/GPRS)

Battery:

■ High-capacity rechargeable and user-replaceable Li-polymer battery. Standard single battery provides 3000 mAh (up to 8 hours normal use). Second battery can be installed by user or factory-fitted at time of order and will increase
internal capacity to 6000 mAh (up to 14 hours normal use).

Power Supply:

■ AC adapter/charger: 100-240 V AC, 50-60 Hz Optional auto adapter/charger: 12-19 V DC

Environmental:

■ IP54

Iris Camera (optional):

■ 1.3 M pixel Image Resolution: 640 (w) x 480 (h) VGA IR invisible illuminators, full SDK support

DIGITAL STILL CAMERA (optional):

■ 3.2 M pixel, 24-bit full color, Image Resolution: 2048 x 1536 to 160 x 120, Depth of Field: 0.6 to 5.1m, Illumination: Preview and flash, full SDK support

DAP CE3240BWE

Description
DAP CE3240 Family is specifically designed to transfer DAP's mobile computing expertise into the featherweight field of handhelds.

Meeting all expectations, it also offers the largest variety of customization hardware modules and features the most efficient, safe and cost effective tools for all field workers.

Technical Specifications

Operating System:

■ Windows CE 5.0

Processor:

■ XScale (Bulverde) - PXA270, 520 MHz

Memory:

■ 128 MB Storage Flash

■ 128 MB SRAM

Display:

■ 3.5" QVGA TFT transmissive color LCD with LED backlighting

Keyboard:

■ Highly ergonomic 22-key keypad with 10 numeric and function keys plus 2 trigger keys

Connectivity - CE3240B ETHERNET EDITION

■ Ethernet 10BaseT

Connectivity - CE3240BW WIRELESS EDITION adds:

■ Internal Bluetooth Class 2

■ Internal 802.11 b/g

Power:

■ Rechargeable 2000 mAh Lithium-Ion battery pack

■ Battery Life: 2 to 4 working days

Adaptable End-Caps:

■ 1D/2D Barcode Reader (CMOS Imager)

■ Optional Integrated Image Scanner (2D Codes, Linear, Postal Modules, OCR Fonts)

PC Card and SDIO:

■ 1 PC Card Type II (CF Card via Adapter)

■ 1 Secure Digital (SD or SDIO) slot

MaxID iDL500

Description

The iDL500 multimodal, rugged mobile computer offers a complete set of features for virtually any identity management challenge. On-board contact card, contactless card, barcode, and optical fingerprint readers combined with a digital camera, GPS, and comprehensive wireless communications make the iDL500 truly unique!

The iDL500 integrates enhanced features for the widest range of identity management applications. Additional card reading capabilities are provided by the combined contactless & smart card reader which is FIPS-201 compliant and has iClass® capabilities. Optional magnetic swipe & OCR/MRZ accessories allow the operator to screen credentials, including passports, e-passports, Transportation Worker’s Identification Credentials (TWIC), Common Access Cards (CAC), First Responder Authentication Cards (FRAC), Personal Identity Verification (PIV), driver’s license and other documents. The latest digital camera technology offers fast acquisition of FIPS-201 compliant facial images even under low-light levels.

This powerful set of personal identity validation features are complemented by GSM/GPRS/EDGE, 802.11b/g WiFi, and Bluetooth wireless communications capabilities. Running Microsoft® Windows CE .NET 5.0 and 6.0, the iDL500 offers an open, flexible platform. It is supplied with a comprehensive Software Development Kit to enable fast and easy application development.

While the entire device weighs less than two pounds, the high-impact ABS plastic case is shock tested to survive repeated drops of more than three feet to concrete and is designed to withstand ingress of water and dust. At only 9.2” by 4.2” by 2.3”, the unit’s compact size still allows for a 3.5” color TFT LCD display at 320x240 resolution that is readable in sunlight. An integrated 40-key QWERTY keyboard also includes several programmable function keys. The high capacity Lithium-Ion battery is designed to last a full typical shift. It is hot swappable and easily changed to allow continuity of operation during periods of intensive or extended use.

Ergonomically designed to sit easily in the operator’s hand, the iDL500 is lightweight and provides a truly mobile and flexible multimodal identity management tool.

Technical Specifications

Core:
■ Processor PXA270 @ 520MHz
■ RAM 128 MB
■ Flash 1GB
■ Additional Memory 4 GB micro-SD card as standard (higher capacity cards supported)
■ Operating System Windows CE.NET 5.0 and 6.0

Peripherals:

■ Fingerprint Reader Optical 500DPI, FIPS201 approved, 0.64” x 0.95” (16.2mm x 24.3mm) window, 480 x 320 pixel image

■ Barcode Reader All common 1D & 2D barcodes

■ Camera 1.3 MP color, FIPS compliant for facial image capture, LumiLED illumination

■ GPS 50 channel high sensitivity GPS receiver

■ Contactless Card FIPS approved ISO 14443 proximity and ISO 15693 vicinity card reader

■ Contact Card FIPS approved ISO 7816 smart card reader

User Interface:

■ Display 3.5” , landscape format, 65K color 320 x 240, ¼ VGA active TFT, backlit touch screen

■ Keyboard 40 key, QWERTY layout, two application buttons in hand grip, backlight

Communications:

■ USB USB full speed host/slave, compatible with USB 2.0 hosts. 100mA max supply, supports mass storage and other devices including keyboard and mouse.

■ WPAN Class 2 Bluetooth 2.0 / 2.1 + EDR

■ WLAN 802.11 b/g WiFi

■ WWAN Quad band GSM/GPRS/EDGE, voice supported via Bluetooth headset, user accessible SIM card. CDMA 1X optional, WCDMA in future

Power:

■ Main Battery 5000mAh Lithium-Ion, fuel gauge
■ Backup Battery Hot-swap supported via internal super-capacitor

Physical:

■ Weight 1.8lbs (820g) including battery
■ Dimensions (LxWxH) 9 ¼” (235mm) x 4 ¼” (107mm) x 2 ½” (59mm)

Environmental:

■ Operating Temp 15º to 130º F (-10º to 55º C)

■ Storage Temp -5º to 150º F (-20º to 65º C)

■ Humidity 10% to 90% RH, non-condensing

■ Drop Durability Six repeated 4ft (1.2m) drops onto concrete

■ Sealing IP66

■ Electrostatic Discharge +/- 4kV DC (contact discharge, direct / indirect), +/-8kV DC (air discharge)

Regulatory:

■ North America / FCC, Europe / CE

Included Accessories:

■ 12V 3A universal a/c adapter, mains cable, USB cable, two batteries & manual. SDK on request

Optional Accessories:

■ ISO 7811 compliant Magnetic Stripe reader.

ICAO / ISO 7501 compliant OCR-B / Machine Readable Zone (MRZ) reader,

Stand-alone battery charger

Additional batteries

Military spec pocket holster with belt attachment

MorphoTrak MorphoCheck

MorphoCheck™ is a portable terminal used to check the identity of an individual using their identity documents and biometric data. By comparing the fingerprint of the document holder (boarding card, ID card or passport) with the fingerprint in the document, MorphoCheck™ enables an individual’s identity to be checked quickly and reliably.

MorphoCheck™ can authenticate all types of identity documents quickly and easily.

Technical specifications

• High Quality SAGEM Optical Fingerprint Sensor (500 dpi, 256 grey levels)

• Integrated Rochford Thompson OCR Swipe-through Reader for Machine Readable Zone (MRZ) capture

• Built-in ACG HF Dual ISO reader (ISO 7816 & full ISO 14443 A/B)

• Internal Secure Access Module (SAM) sockets

• Psion Teklogix professional PDA-based Technology running Windows Mobile (520 MHz Intel PXA270 processor, 3.6” Transflective Full VGA TFT LCD Touch Panel, 65536 colors, 128 MB Flash Memory & 128 MB SDRAM)

• Integrated Bluetooth, Optional WiFi (802.11b/g) and GSM/GPRS/Edge via expansion card

• SAGEM application for ICAO Decoding with Basic and Extended Access Control management

• On-board SAGEM fingerprint encoding and matching algorithms

Cross Match Be.U Mobile

Technical Specifications

Fingerprint Types:

■ Single-finger rolls, Single-finger flats

Resolution:

■ 508 ppi

Capture Area:

■ 0.7" x 0.5" (18 mm x 12.8 mm)

Standards:

■ PIV-compliant FIPS 201 CHUID reader

■ MIL-STD-810F compliant housing

Operating Temperature:

■ 14 to 122° F (-10 to 50º C)

Humidity Range :

■ 10-90% non-condensing; splash resistant

Dimensions:

■ 3.94" x 8.58" x 1.85" (100 mm x 218 mm x 47 mm)

Weight:

■ 24 oz. (683 g)

Interfaces:

■ WiFi, GSM, CDMA

Operating Systems:

■ Windows CE 5.0

Certificate:

■ CE, FCC, TUV, WEEE

Datastrip DSV3

Description

Datastrip’s EasyVerify is a handheld biometric reader designed specifically for on-the-spot mobile identity verification. The unit comes standard with a 37-key QWERTY keyboard that can be used to input critical data, as well a biometric fingerprint sensor and a contactless smartcard reader. Additional options include cameras for facial and/or iris biometric identification, and readers for contact cards, magnetic stripes or 2D barcodes.

The EasyVerify is ergonomically designed to be held comfortably in the user’s hand. The unit can be configured to operate for up to 8 hours of battery life, and its hot-swappable replacement batteries boost the EasyVerify’s efficiency and reliability in the field.

Offering a variety of expansion capabilities, the EasyVerify can be connected optionally to remote databases via Wi-Fi, Bluetooth® and cellular networks. These support applications such as memory expansion and global communications.

Technical Specifications

Size:

■ 6.2” x 7.3” x 2.1” (156 mm x 185.42 mm x 53 mm)

Weight:

■ Approx. 2.0 lbs (1 kg) with battery

Operating System:
■ Microsoft® Windows® CE.NET Version 5.0

Processor:

■ AMD LX800 Geode (x86), 500 MHz, integrated FPU

Display:

■ 3.7” transflective color-reflective TFT (LED-backlit) VGA LCD indoor/outdoor viewable 640 (h) x 480 (v) pixels

Memory:

■ 256 MB Flash DRAM memory (expandable to greater than 1 GB);

■ 256 MB 64-bit DDR (expandable to 1 GB)

Biometrics:

■ Fingerprint Sensor (standard): FIPS 201/NIST SP 800-76 compliant, UPEK TCS1 508-dpi capacitive solid-state sensor, 8-bit grayscale 12.8 mm x 18.0 mm sensor area

■ Face Digital Still Camera (optional):

■ 3.2 M pixel, 24-bit full color

■ Captured Image Resolution: 2048 (h) x 1536 (v) to 160 (h) x 120 (v) pixels

■ Depth of Field: 0.6 m to 5.1 m

■ Illumination: Preview and Flash, full SDK support

■ Iris Camera (optional): 1.3 M pixel

■ Captured Image Resolution: VGA 640 (h) x 480 (v) pixels

■ Illumination: NIR, full SDK support

Keypad:

■ 37-key QWERTY keypad, 2 x 4 function keypad, 5-position joystick

Smartcard Interface:

■ Supports ISO 14443 A/B contactless (standard),

■ ISO 15693 contactless (optional) and ISO 7816 contact (optional) smartcards

Onboard Interface:

■ USB 2.0 Host: mini-A (x1); USB 2.0 Client: mini-B (x1);

■ CF Type I/II external interface (x1); SDIO internal interface (x1)

Docking Station Interface:

■ USB 2.0 Host: standard A (x2); USB 2.0 Client: standard B (x1); Ethernet: 10/100 RJ45 (x1); RS-232 DB9 (x1)

Optional Point and Shoot Optical Scanner:

■ 1D/2D barcodes, OCR (A, B, MICR), 50° (h) x 37.5° (v)

Optional Internal Wireless Features:

■ 16-channel global positioning receiver, Wi-Fi (802.11b/g), Bluetooth®, cellular GSM (GPRS/EDGE)

Optional Docking Station:

■ USB 2.0 Host: standard A (x2); USB 2.0 Client: standard B (x1); Ethernet: 10/100 RJ45 (x1); RS-232 DB9 (x1).

■ Charges batteries inside terminal.

Optional Proximity Card Reader:

■ 125 kHz

Battery:

■ High-capacity 7.4 V rechargeable and field-replaceable Li-polymer smart battery with integral charging and protection circuitry. Battery provides 5000 mAh (up to 8 hours normal use).

Power Supply:

■ AC adapter charger: 100-240 V AC, 50-60 Hz; external power: 11.4-10 V DC; power connector: 1.7 mm DC power jack or docking station connector.

Environmental:

■ IP54, exceeds MIL-STD 810F

Edgeline CN3 PIV

Product Overview

The Edgeline Technologies Personal Identity Verification (PIV) module is an all-in-one accessory that enables Intermec CN3 and CN4 series mobile computers to authenticate personnel via multiple methods. The PIV module incorporates a biometric fingerprint reader, a magnetic stripe reader, a contact smart card reader and a contactless smart card reader into a single snap-on solution.

Used with Intermec CN3 and CN4 series mobile computers, the PIV module provides maximum flexibility for applications that demand a multi-step authentication process for access to restricted areas or to highly confidential information. The solution can help federal agencies meet personnel identification requirements driven by Homeland Security directives, as well as assist state and local government with meeting similar needs in Mass Casualty Incident (MCI) and emergency response situations.

The PIV accessory is designed for quick and easy snap-on attachment to the host device. The CN3 and CN4 Single Dock or Multi Dock enables charging and communication with the mobile computer, via Ethernet and USB client, while the module is attached emergency management The PIV solution can be used to authenticate First Responders within a restricted site and limit access to others, so that site control can be improved. The solution can also be used by EMT personnel to identify, record and treat those people affected by a disaster.

Law Enforcement

Drivers license identification methods vary from state to state, from use of magnetic stripes to bar codes to smart cards. Fingerprinting is also becoming more commonly used when positive identification is needed. The PIV module provides law enforcement officers with fast and flexible access to the data they need from multiple sources.

Military

Mobile computer users in the military can leverage the PIV module to log in to government systems with their electronic smart card (Common Access Card) or contactless smart card, as required by the Department of Defense. They can also use the solution to positively identify and/or authenticate individuals in critical situations. In addition, the PIV module can be used to identify and track military personnel deployed around the world, from the beginning of their travels, through multiple stops, to their destination.

Specifications

RoHS & WEEE compliant

OS Versions Supported

• Microsoft® Windows Mobile® 5.0
• Microsoft® Windows Mobile® 6.1

Physical

• Dimensions (mm): 48 H x 84.5 W x 134 D
• (1.89”H x 3.33”W x 5.26”D)
• Weight: 156 g (5.5 oz)

Environmental

• Operating Temp: -10°–50° C (14°–122° F)
• Drop Spec: 4 ft (1.22m), 26x all faces, sides and corners
• Environmental Protection : IP54 compliant

Data Input Technologies

Biometric Fingerprint Reader

• FIPS 201 & NIST 800-76 standards compliant
• FBI PIV-IQF compliant
• 0.55 x 0.87 in (14 x22 mm) optical sensor
• 500 DPI, 8 bits per pixel

Magnetic Stripe Card Reader

• ISO 7810 & 7811 standards compliant
• Formats supported: ISO 7811 and AAMVA
• Card Thickness Supported:
0.76mm ± 0.08mm

Contact Smart Card Reader

• ISO 7816 & 7810, GSC-IS & EMV Level 1 standards compliant

• Formats supported: Asynchronous (T=0 & T=1 protocols) and Synchronous RFID Contactless Smart Card Reader
• ISO 14443, FIPS 201 and NIST 800-73 standards compliant
• Provides a read-only interface with a maximum read range of 10cm

Accessories

• CN3 Single Dock and CN3 Multi-Dock
• Enables charging and data synchronization (via USB ActiveSync & Ethernet) with the mobile computer while the PIV module is connected.

Edgeline Technologies, LLC 17735 NE 65th St Suite 130
Redmond, WA 98052
Phone: 415-897-2230
Email: jlucan@EdgelinePC.com
Website: www.edgelinepc.com

Motorola MC75 with Sagem Optical Sensor

MC75 3.5G Worldwide Enterprise Digital Assistant (EDA)

No matter what your workers need to get the job done, Motorola's MC75 Worldwide Enterprise Digital Assistant delivers by combining an unparalleled number of business capabilities into an easy-to-carry rugged device. 3.5G GSM HSDPA and CDMA-EVDO Rev A support provides high performance voice and data services around the globe.

Your workers will enjoy having all the features they need right at their fingertips in one device designed to endure all day everyday use outside the enterprise -- including push-to-talk, integrated GPS with superior sensitivity and tracking capabilities, 1D or 2D bar code scanning, a high resolution 2 megapixel autofocus digital color camera, 802.11a/b/g wireless LAN (WLAN), Bluetooth and IrDA connectivity.

Technical Specifications

2D IMAGER ENGINE

Aiming element (VLD): 650 nm ± 5 nm
Ambient light immunity: Total darkness to 9,000 ft. candles/96,900 lux
Field of View: Horizontal: 32.2°; Vertical: 24.5°
Focal distance from front of engine: 5 inches; Far: 9 inches
Illumination element (LED): 635 nm ± 20 nm
Optical resolution (gray scale) : 640 H x 480 V pixels (gray scale)
Pitch angle: ± 60° from normal
Roll: 360°
Skew tolerance: ± 50° from normal

LINEAR 1D SCANNER

Optical resolution: 4 Mil minimum element width
Scan angle: 47° ± 3° default, 35° ± 3° reduced
Scan rate: 104 (+/- 12) scans/sec (bi-directional)

PERFORMANCE CHARACTERISTICS

Ambient light: 10,000 candles
Data capture options: 1D linear or 2D imager
External interfaces: RS232, USB 1.1
Imager / Camera: Yes
Memory: 128MB RAM; 512MB Flash
Operating system (OS): Windows Mobile 6.5 Professional
Processor (CPU): XScale™ PXA270 624 MHz processor
Windows Mobile: Yes

PHYSICAL CHARACTERISTICS

Audio options: Microphone, Receiver, Speaker , Software support for full duplex record and playback (stereo), Headset jack
Dimensions (HxWxD): 6 in. L x 3.3 in. W x 1.7 in D (15.24 cm L x 8.4 cm W x 4.4 cm D)
Display resolution: Transflective color 3.5” full VGA with backlight, 640 x 480
Display type: LED backlight, touch screen
Keyboard: Numeric; QWERTY, AZERTY, QWERTZ, DSD
Network connections: Ethernet (via cradle), Full-speed USB, host or client
Notification: Vibrator, LED
Rugged: Yes
Weight: Standard 1.5X battery: 14.9 oz./422 g
Extended Capacity 2.5X battery: 15.7 oz./446 g

POWER

Main battery: Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Extended capacity battery: Rechargeable Lithium Ion 3.7V, 4800 mAh Smart Battery

REGULATORY SPECIFICATIONS

EMC EN 301 489-1, EN 301 489-7, EN 301 489-17, EN 301 489-19, IEC 60601-1-2, EN 55022, FCC Part 15 Subpart B, ICES 003 Class B, EN 55024
Electrical safety: EN 60950-1, IEC 60950-1, Certified to UL / cUL 60950-1
Environmental: RoHS-compliant
Laser safety2: EN 60825-1, IEC 60825-1, IEC Class 2/FDA Class II
RF exposure: USA: FCC Part 2, FCC OET Bulletin 65 Supplement C; Canada: RSS-102; EU: EN 50360; Australia: Radiocommunications Standard 2003

USER ENVIRONMENT

Drop specification: Multiple 5 ft. drops to concrete at ambient temperature 73°F / 23°C;
Multiple 4 ft. drops to concrete across operating temperature range;
Meets and Exceeds MIL-STD 810G
Electrostatic discharge (ESD) : ±15kV air discharge, ±8kV direct discharge
Environmental sealing: IP54
Humidity: 95% non-condensing
Operating temperature: 14° F to 122° F/-10° C to 50° C
Storage temperature: 40° F to 158° F/-40° C to 70° C (w/o battery)
Tumble specifications: 1,000 1.6 ft./.5 m tumbles (2,000 drops);

WARRANTY

Handheld Warranty: The MC75 is warranted against defects in workmanship and materials for a period of 12 months from date of shipment, provided that the product remains unmodified and is operated under normal and proper conditions.

WIRELESS DATA COMMUNICATIONS

Antenna: Internal for LAN, External for WAN
GPS-enabled: Integrated Assisted-GPS (A-GPS)
Individual data rates supported: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
Operating channels: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan Only, Chan 8-165 (5040 – 5825 MHz), Actual operating channels/frequencies depend on regulatory rules and certification agency
Security: WPA2, WEP (40 or 128 bit), TKIP, TLS, TTLS (MS-CHAP), TTLS (MS-CHAP v2), TTLS (CHAP), TTLS-MD5, TTLS-PAP, PEAP-TLS, PEAP (MS-CHAP v2), AES, LEAP
Voice communication Integrated Voice-over-IP ready (P2P, PBX, PTT),
Wi-Fi™-certified, IEEE 802.11a/b/g direct sequence wireless LAN
WLAN: 802.11a/b/g tri-mode radio
WPAN (Bluetooth Support) on-board chip antenna, Bluetooth v2.0

BIOMETRIC / SMART CARD

+ The Biometric Tri Scan reader combines CONTACT SMART CARD, CONTACTLESS SMART CARD and FINGERPRINT BIOMETRIC CAPTURE. The biometric core uses a rugged, high image quality optical fingerprint sensor. The Tri scan reader is compatible with most contact AND contactless Smart Cards including all Mifare and iClass contactless cards. The contactless card reader is hardware compatible with the CAC, TWIC, FRAC cards as well as ICAO ePassports.

+ The Tri Scan reader attaches as a snap-on unit to the base of the MC75 - the mechanical design of the module enables the attachment to remain compatible with existing MC75 accessories such as the desktop charge cradle and the car charger. The module may be quickly removed from the MC75, or semi permanently attached with two screws.

+ The fingerprint reader sensor provides a rugged, reliable solution even in dusty or damp environments. The sealed sensor with a toughened platen provides immunity to Electro Static Discharge and protection from scratching and mechanical damage.immunity to 15kV and the ability to withstand everyday wear and tear (rated to >2 million touches). The reader conforms to the FIPS 201 specification for Single Finger Capture Devices.

+ The contact smartcard reader is compliant to ISO7816-1,2,3,4, and supports T=0 and T=1 protocols and 2-wire and 3-wire modes. The reader is based on industry standards, including PC/SC and EMV 2000 Level 1 to address a wide range of applications across government, enterprise and financial sectors.

+ The contactless smartcard reader provides the ability to read and write to a wide variety of transponders at 13.56 MHz compliant to ISO14443A, ISO14443B, ISO 15693 and HID iClass.

+ The Tri Scan reader is supported by demonstration software and a Software Development Kit (SDK). The SDK is required for application development and provides the means to capture finger images. The fingerprint reader directly supports template extraction and matching in ANSI INCITS 378-2004, MINEX A, ISO/IEC 19794-2 and SAGEM proprietary formats. Templates may be stored on a remote database, on a contact or contactless smartcard or locally on the reader and used for 1:1 and 1:N verification.

+ Communication is via the MC75 USB port which is automatically switched to allow ActiveSync of the MC75 with a host device.

Options

Audit Trail Option

The Audit Trail option enables PIVCheck and OMNICheck software to upload a record of each credential verification transaction to the PIVCheck PACS Server.

Start Date and Time
TWIC Authentication Mode
CHUID FASC-N
Card Holder Name
Expiration Date and Time
Number of PIN attempts (including first)
Verification Date and Time
CHUID Check Results (Ok, Bad, or Not Checked)
Biometric Comparison Results (Match, No Match, or Not Configured)
TSA Hotlist Check Results (Not Found, Found, Not Configured, or Deferred)
PKI Validation Results (Good, Revoked, Not Configured, or Deferred)
Operator User Name
Unit (System) ID (serial number)
Stop Date and Time
Overall Result (Authenticated, Not Authenticated)

On the server side, the Audit Logs reporting tool includes several canned reports and provides an easy to use SQL editor for generating your own queries.

OMNICheck Plus Option

The OMNICheck Plus option converts a standalone portable verification terminal into a network-aware tool that provides a rich user experience. OMNICheck Plus is designed to work along with the PIVCheck Plus system, while leveraging the legacy data already stored in the PACS. With OMNICheck Plus, you can securely:

Assign one or more access rights to the mobile terminal, emulating a PACS reader
Reject credentials if they are not registered in the PACS or the cardholder does not have the appropriate access rights assigned to the terminal
Display the cardholder's photo, name, and PACS access rights after a contactless read
Stream card validation transactions to the server in real time, eliminating the need to manually export data to removeable media
Configure the device at the server, locking the device down and preventing tampering

The Plus option is a must-have for users who need increased assurance levels when not performing biometric matching or simply need to temporarily expand their security perimeters.

PACS Data Import Option

When the Data Import option is enabled, the PACS Plug-in synchronizes the PIVCheck credential database with credential data from the PACS. Data flows in effect, the opposite direction, from PACS registration. This enables devices running OMNICheck Plus to display access rights and PACS status information of PIV and non-PIV credentials, and allows PIVCheck Plus operators to assign access rights on the fly during PACS registration.

Not all PACS Plug-ins support Data Import. Check the PACS Plug-ins section to determine individual plug-in support.

Prerequisites

OMNICheck Plus Edition, PIVCheck Plus Mobile Edition or PIVCheck Plus Desktop Edition

Note: The Data Import option is discounted by 50% when ordered with PIVCheck Plus.

Passage Option

The Passage option enables PIVCheck Desktop, PIVCheck Mobile, TWICCheck, or OMNICheck to send a Wiegand output to a PACS panel. Supported output formats are:

200-bit FASC-N
75-bit GSA
75-bit TSA (with ICI encoded in first byte of Credential Number)
64-bit BCD
48-bit GSA
48-bit TSA (with ICI encoded in first byte of Credential Number)
HID Fortune 1000
26-bit

A Wiegand data converter is shipped with each licensed client. The converter transforms network messages into Wiegand output, producing the same wire protocol expected from a typical PACS reader. The client does not make access control decisions. It simply reports the appropriate card number in the specified Wiegand format to the panel. The access control panel or its host ultimately decides whether a door or gate should be unlocked.

PIVCheck Passage supports a configurable delay so that the PACS has time to push a newly registered credential to the panel. For previously registered credentials, no delay is necessary.

Registration Option

OMNICheck's Registration option adds seamless PACS registration to OMNICheck, enabling OMNICheck to perform double duty as both an authentication/verification tool and a registration tool. By tapping the Mode hot key, operators can switch from authentication to PACS registration mode. The reader then behaves like PIVCheck Plus Mobile Edition, extracting all of the containers from the credential, and performing 3-factor authentication.

Operators can provide custom, user-definable values, assign access rights, swipe proximity and DESFire cards to perform credential linking just like they were using PIVCheck.

A simple tap of the Mode hot key switches the reader back to authentication mode.

OMNICheck

Site Navigation

Search

Configurations

Mobile Readers

Options